• 非标机械零部件机加工的技.. 10-23
• 非标机械零部件机加工的技.. 10-11
• 机械加工工艺过程的自动化 09-28
• 机械加工误差产生的主要原.. 09-04
• 设计机械应满足的条件 08-10

联系我们

保定市新市区鼎立机械厂
手机：18630206988
手机：13513281627
电话/传真：0312-3268787
联系人：孙经理
邮箱：1912153900@163.com
地址：保定市新市区鼎立机械厂

微机械加工就是利用高科技手段制造微型的机械部件，称之为微机械加工技术，当然在目前的条件下制作微机械还是有些困难的，需要有很高的技术支持，在这方面国外的科技水平已经有了很大的提高，如1962年第一个硅微型压力传感器问世，所以说中国的机械加工有待提高。 Micromachining is the use of high-tech means to manufacture micro mechanical parts, which is called micromachining technology. Of course, it is still difficult to make micro machinery under the present conditions. It needs very high technical support. In this respect, the level of science and technology has been greatly improved in this respect, such as the first silicon micro pressure in 1962. Force sensors are coming out, so China's mechanical processing needs to be improved. 微机械加工不是单纯的使用加工设备制作机械，同时要考虑加工过程中的温度调节，一般在高于或低于常温状态的加工﹐会引起工件的化学或物相变化﹐称热加工；冷加工按加工方式的差别可分为切削加工和压力加工。这就需要加工设备有过高的硬性技术含量以达到要求的加工结果。 Micromachining is not simply used to make machinery for processing equipment, but at the same time the temperature adjustment in the process should be considered. Generally, the processing in the process of higher or lower temperature will cause chemical or phase change of the workpiece, which is called heat processing, and the cold machining can be divided into cutting and pressure processing according to the difference of the processing mode. This requires processing equipment to have high rigid technical content to meet the required processing results.