• 非标机械零部件机加工的技.. 10-23
• 非标机械零部件机加工的技.. 10-11
• 机械加工工艺过程的自动化 09-28
• 机械加工误差产生的主要原.. 09-04
• 设计机械应满足的条件 08-10

联系我们

保定市新市区鼎立机械厂
手机：18630206988
手机：13513281627
电话/传真：0312-3268787
联系人：孙经理
邮箱：1912153900@163.com
地址：保定市新市区鼎立机械厂

非标自动化设计注意事项： Non - standard automatic design attention: 1、对已在老式工艺生产的产品。放下你的架子，不仅仅和技术人员沟通，要找实际的操作制造工人沟通，了解实际生产过程中的问题和想法，常常会有意想不到的收获的。 1. Products that have been produced in the old fashioned process. Put down your shelf, not only communicate with the technical staff, to find practical operators to communicate, to understand the problems and ideas in the actual production process, and often have unexpected gains. 2、分析初步设计方案所需要的条件。产品生产工艺、制定设备技术参数、明确所能承受的综合制造成本、对比传统制造工艺的综合性能等，尽可能详细。 2. Analysis of the requirements for the preliminary design scheme. The production process of the product, the technical parameters of the equipment, the comprehensive manufacturing cost that can be borne, and the comprehensive performance of the traditional manufacturing process are compared as detailed as possible. 3、选择理想的加工方位。注意事项:安全、人性化、设备的清洁、设备组合的可能性等。本人认为是非标设备设计最主要的步骤，已经体现了设备的优和差。 3, choose the ideal processing position. Matters needing attention: safety, humanization, cleaning of equipment, possibility of equipment combination, etc. I think it is the most important step in the design of non-standard equipment, which has already manifested the superiority and the difference of the equipment. 4、功能件的合理组合。注意事项:合理的考虑升级的可能性和通用性。我们毕竟不希望专用专用，其它一无用处的。 4, the rational combination of functional parts. Note: consider reasonably the possibility and versatility of upgrading. After all, we do not want exclusive use. 5、设备的优化，不用多说了，最需要时间但很多设计者最不愿意花时间和精力的地方。要求在设备完工那一天还需不断优化。 5, equipment optimization, needless to say, needs most of the time, but many designers are reluctant to spend time and energy. It is necessary to continue to optimize the day when the equipment is completed.